Sharp FP-J40E Operation Manual page 9

Light Control
You can set the Cleanliness Monitor / Plasmaclustor Ion Light to OFF when their SIGN is bright.
1
(with the main unit ON)
2
Plasmacluster Ion ON/OFF
When Plasmacluster Ion is ON, the Plasmaclustor Ion Light will turn on. (blue)
(with the main unit ON)
ON
more than 3 sec.
ADJUSTMENT OF SENSOR DETECTION SENSITIVITY
You can change the sensitivity of the Dust sensor / Odor sensor and the Light sensor .
1
(with the main unit OFF)
2
Dust sensor / Odor sensor
3
OM_FP-J40E_40L_EN.indd 7
more than 3 sec.
DIM
AUTO
OFF
more than 3 sec.
Standard High Low
NOTE
• If the power OFF Button is not pushed within 8 seconds of
adjusting sensor sensitivity, the setting will be saved automatically.
• The sensor sensitivity setting will be saved even if the main unit is
unplugged.
NOTE
• When the main unit starts operation, the
operation starts in the previous mode it
was operated in.
OFF
NOTE
• When the main unit starts operation, the
operation starts in the previous mode it
was operated in.
more than 3 sec.
Light sensor
EN-7
4h 8h 2h
High Low
Standard
2018/06/25 11:44:13