EN - 4
5.0 panel DeSCription
6.0 ConneCtion anD operation
Before installation, please make sure all devices you wish to connect have been turned off.
1) Connect the audio source device to the Converter using appropriate Toslink or Coaxial
cables
2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate R/L cable
3) Powered on the converter by USB cable
Note: When connected to the Toslink and Coaxial cables at the same time, the product will
give priority to Toslink input
Attention: Insert / Extract cable gently.
WWW.TECHLY.COM
DIGITAL TO ANALOG
AUDIO CONVERTER