PC 6150/FPC6150 User's Manual
TTL signal asserted (high state): greater than 4.75V while sourcing
500uA.
High state output impedance: less or equal to 1Kohm from output to
common.
POWER GOOD @
115/230V,FULL LOAD
POWER FAIL @115/230V, FULL
LOAD
B.1.2
EFFICIENCY
115 VAC @Full Load
230 VAC @Full Load
B.1.3
ENVIRONMENTAL REQUIREMENTS
The power supply will be compliant with each item in this specification
for the following Environmental conditions.
B.1.4
TEMPERATURE RANGE
Operating
Storage
B.1.5
HUMIDITY
Operating
Storage
B.1.6
VIBRATION
The subject power supplies will withstand the following imposed
conditions without experiencing non-recoverable failure or deviation
from specified output characteristics.
Vibration Operating – Sine wave excited, 0.5 G maximum acceleration,
10-250 Hz swept at one octave / min. Fifteen minute dwell at all
resonant points, where resonance is defined as those exciting
frequencies at which the device under test experiences excursions
two times large than non-resonant excursions.
60
100 –500mSec.
1 mSec. minimum
68% minimum
68% minimum
0 to +50 deg. C
-20 to +80 deg. C
5 –95% RH, Non-condensing
5 –95% RH, Non-condensing
Appendix