Safety Precautions - Acnodes FPC 6150 User Manual

Before getting started, read the following important cautions.
1.
The PC6150 / FPC6150 does not come equipped with
an operating system. An operating system must be loaded
first before installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
3.
Disconnect the power cord from the PC6150 / FPC6150
before making any installation. Be sure both the system
and the external devices are turned OFF. Sudden surge
of power could
components.
PC6150 / FPC6150 is properly grounded.
4. The brightness of the flat panel display decreases with usage.
However, hours of use vary depending on the application
environment.
5. Turn OFF the system power before cleaning. Clean the
system using a cloth only. Do not spray any liquid cleaner
directly onto the screen. The PC6150 / FPC6150 may come
with or w/o a touch screen. Although the touch screen is
chemical resistant, it is recommended that you spray the
liquid cleaner on a cloth first before wiping the screen. In
case your system comes without the touch screen, you
must follow the same procedure and not spray any cleaner
on the flat panel directly.
6. Avoid using sharp objects to operate the touch screen.
Scratches on the touch screen may cause malfunction or
internal failure to the touch screen.
7. The flat panel display is not susceptible to shock or vibration.
When assembling the PC6150 / FPC6150, make sure it
is securely installed.
1

Safety Precautions

ruin sensitive
Make sure the