Table of Contents
Advertisement
PC 6150/FPC6150 User's Manual
mapped results by choose "3" DRAWING TEST under PM.BAT
Initializing the PenMount driver
If you don't have the initialization commands in AUTOEXEC.BAT,
initialize PenMount C:\PENMOUNT\PMINIT) controller before you use
the PenMount Touch Screen. The display will show the initialization
message:
PenMount V7.06 Copyright(c) SALT International Corp.
Test:COM<n> IRQ<n> (<n> is the number after PMDETECT done)
PenMount communication settings: COM<N> IRQ<n> Baud Rate:
<xxxx>
... ... ... ... ... ... ... ... ... ...
Demonstration
To demonstrate or test touch screen operation, selecting "3"
DRAWING
TEST in PM.BAT file of Utility Directory. Drawing on screen.The other
demonstration
program
called
"ICECREAM.EXE"
in
the
"PENMOUNT" directory can also be applied.
28
Driver Installation
Advertisement
Table of Contents
