Configuration Of Options - Toshiba e-studio 555 Quick Start Manual

Chapter 1 PREPARATIONS

Configuration of options

1.
Finisher (MJ-1027)
This Finisher enables sort/group finishing and stapling.
The Hole Punch Unit (optional, MJ-6003) and the Inserter
(optional, MJ-00) can be installed in this Finisher.
2.
Saddle Stitch Finisher (MJ-1028)
This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. A maximum of 50 sheets of
80 g/m or 20 lb. Bond plain paper can be stapled. The
2
Hole Punch Unit (optional, MJ-6003) and the Inserter
(optional, MJ-00) can be installed in this Finisher.
3.
Saddle Stitch Finisher (MJ-1029)
This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. A maximum of 00 sheets of
80 g/m or 20 lb. Bond plain paper can be stapled. The
2
Hole Punch Unit (optional, MJ-6003) and the Inserter
(optional, MJ-00) can be installed in this Finisher.
6
1
2 3
4 5
4.
Hole Punch Unit (MJ-6003)
This unit enables you to punch holes in printed sheets.
5.
Inserter (MJ-7001)
This unit enables you to insert a sheet of paper which
does not need to be copied. An already copied sheet, as
well as a blank sheet, can be inserted. This inserter is also
usable for single finishing operation without copying,
such as stapling or hole-punching.
6.
External Large Capacity Feeder (MP-4004)
This feeder enables you to feed A or LT paper up to 000
sheets (80 g/m or 20 lb. Bond). Thick paper (up to 209
2
g/m or 0 lb. Index) can also be set in this feeder.
2
6