Parts Unit (Hinge); Board (Ip7Bt/Ip7E) - Sony DCR-IP5 Service Manual

DCR-IP5/IP5E/IP7BT/IP7E

2-9. PARTS UNIT (HINGE)

4 Two screws
(M1.4 × 2.5),
lock ace
1 Waterproof sheet
2 Two screws
(M1.4 × 2.5),
lock ace
1 Open the LCD unit in the
direction of the arrow A.
A
3 Screw
(M1.4 × 3)
B
6 Screw
(M1.4 × 2),
ace
7 FP-366 flexible board
6 Menu sheet metal
5 Screw (M1.4 × 2.5),
lock ace
FP-366 flexible
board
1 Three screws (M1.4 × 2.5),
FP-366 flexible board
5 Remove the LCD unit,
parts unit (Hinge) in the
direction of the arrow B.
4 Screw
(M1.4 × 2.5),
lock ace
Three
dowels
2 Screw
(M1.4 × 2.5),
lock ace
3 Harness
(from LCD section)
(17P)
3 R button
2 Muffle sheet (B)
lock ace
Start the removal work afar the LCD section (PD-142 board) has
been removed referring section 2-1.
4 Panel cabinet (R) assembly
P D
3 Two screws
(M1.4 × 2.5),
lock ace
5 Parts unit
2-12
FP-366 flexible board
Harness (17P)
4 Lens cabinet
(R) assembly
Liquid crystal
indicator module
PD-142 board
Back light
2
- 1 4 Cold cathode fluorescent
tube, BL shield sheet (N)
2 Harness (15P)
1 Tape F
(Hinge)
Dowel