Erasing Fault Codes - Volvo Penta TAD570VE Operator's Manual

Fault handling
42

Erasing fault codes

The memory of the diagnostic function is reset when
the power to the engine is disconnected. When the
power is switched on again, the diagnostic function will
check if there are any malfunctions in the system. If so
a new fault codes is registered.
If a malfunction has not been corrected it will be
registered once again and has to be acknowledged
again. The Volvo Penta diagnostic tool VODIA must be
used to erase a fault code.
47711083 09-2018 © AB VOLVO PENTA