Port Triggering
This allows you to set up port triggering rules on the DWR-956M.
Port Triggering WAN Connection: The WAN connection to apply the port triggering rules to.
Click Add to add a port triggering rule to the WAN connection.
Port Triggering Setting
This allows you to set up automatic port triggering rules on the DWR-956M.
Enable: Whether to enable or disable the port triggering rule. Tick this to enable the
port triggering rule. The default is un-ticked.
Triggering Type: The port triggering type. Choose Customization to enter custom ports,
or choose Application to use pre-set ports for an application. Choose the pre-set
application from the Choose... drop-down menu.
Protocol: The protocol for the port triggering rule. This can be TCP, UDP or TCP/UDP.
Name: The name for the port triggering rule.
Start Port: The start port for the port triggering rule.
End Port: The end port for the port triggering rule.
Open Start Port: The start port to open for the port triggering rule.
Open End Port: The end port to open for the port triggering rule.
Click Back to go back to the previous page, click Apply to apply the settings and click Refresh to refresh the page.