Multicast; Igmp Settings - D-Link DWR-956M User Manual

Multicast

The multicast menu is used to set multicast settings on the DWR-956M.

IGMP Settings

This is used to set Internet Group Management Protocol (IGMP) settings.
Default Version: The default version of IGMP to use on the router. This
can be IGMPv2 or IGMPv3. The default is IGMPv2.
Query Interval(s): The query interval for IGMP. The default is 125 seconds.
Query Response Interval(1/10s):
The query response interval for IGMP. The default is 100 seconds.
Last Member Query Interval(1/10s):
The last member query interval for IGMP. The default is 10 seconds.
Robustness Value: The Robustness Value for IGMP. The default is 2.
Maxinum Multicast Data Source(for IGMPv3):
The maximum multicast data sources for IGMPv3. The default is 10.
Fast Leave Enable: Whether to enable or disable Fast Leave. Tick this to
enable Fast Leave.
Membership Join Immediate(IPTV):
Whether to enable or disable Membership Join Immediate. Tick this
to enable Membership Join Immediate.
Click Apply to apply the settings and click Refresh to refresh the page.
Enable IGMP Snooping: Whether to enable or disable IGMP snooping. Tick this to
enable IGMP snooping.
Click Apply to apply the settings and click Refresh to refresh the page.
Enable IGMP Proxy: Whether to enable or disable IGMP proxy. Tick this to enable IGMP proxy.
WAN Connection: Whether to enable or disable IGMP for the WAN connection. Tick this to enable IGMP for the WAN connection.
Click Apply to apply the settings and click Refresh to refresh the page.