Upnp - D-Link DWR-956M User Manual

UPnP

This is used to set Universal Plug and Play (UPnP) settings, so that devices on the
LAN can automatically open ports on the router firewall.
Enable UPnP IGD: Whether to enable or disable the Internet Gateway Device
(IGD) Protocol. Tick this to enable the IGD Protocol.
WAN Connection: The WAN connection to use with the IGD Protocol.
Click Apply to apply the settings and click Refresh to refresh the page.
Blacklist
Enable: Whether to enable or disable the blacklist entry. Tick this to enable the
blacklist entry.
IP Address: The IP address to blacklist from using the IGD Protocol.
Click Add to add a new blacklist entry.