D-Link DWR-956M User Manual page 43

Interface: 3G/4G
Mode: Dhcp
Connection Name: Assign a name for the connection here.
Enable: Tick this to enable this connection.
MTU: The Maximum Transmission Unit (MTU) of the WAN connection.
This is set to 1500 bytes by default.
IP Protocol Type: The IP protocol version used by the WAN connection.
This can be IPv4, IPv6 or IPv4&6.
Choosing one of these options displays other options on the page, and each of these is
documented below.
NAT: Enable or disable Network Address Translation (NAT) on the WAN connection.
Tick this to enable NAT.
Firewall: Whether to enable or disable packet filtering. Tick this to enable packet filtering. The
default is ticked.
IPv4 Static DNS: Whether to enable or disable static DNS entries. Tick this to enter
static DNS entries. Ticking the box displays other options on the page, and these are
documented below.
MAC Address Override:
Whether to enable or disable MAC address override on the WAN connection.
Choosing this option displays other options on the page, and each of these are
documented below.
Enable VLAN: Whether to enable or disable VLAN settings on the WAN connection.
Choosing this option displays other options on the page, and each of these is documented below.
Service Type: The service type for the WAN connection. This can be INTERNET, TR069, TR069_INTERNET, VOIP, INTERNET_ VOIP,
TR069_VOIP, TR069_INTERNET_VOIP, or Other. Choosing the INTERNET, TR069_INTERNET, INTERNET_VOIP, or TR069_INTERNET_VOIP
option displays other options on the page, and each of these is documented below.