Qos Tcp Flags; Bandwidth Limit; Port Bandwidth Limit Configuration - D-Link DWR-956M User Manual

DSCP: The DSCP value for the match result. This can be Default,
AF11(001010), AF12(001100), AF13(001110), AF21(010010),
AF22(010100), AF23(010110), AF31(011010), AF32(011100),
AF33(011110), AF41(100010), AF42(100100), AF43(100110),
CS1(001000), CS2(010000), CS3(011000), CS4(100000),
CS5(101000), CS6(110000), CS7(111000), or EF(101110).
802.1P tag: Select the priority from 1-7 where 7 is the highest

QoS TCP Flags

This allows you to prioritize TCP flags.
Prioritize TCP Flags: Whether to enable or disable prioritizing TCP flags.
Tick this to enable.
Click Apply to apply the settings and return to the previous page.

Bandwidth Limit

The bandwidth limit menu is used to limit the bandwidth of traffic passing through the DWR-956M.

Port Bandwidth Limit Configuration

This allows you to limit bandwidth based on port.
Port Bandwidth Limit Configuration
Enable: Whether to enable or disable the port bandwidth limit.
Tick this to enable the port bandwidth limit.
Choose LAN Port: The LAN port to limit the bandwidth on.
Ingress Rate: The maximum ingress speed, in kbps. Enter 0 to disable the limit.
Egress Rate: The maximum egress speed, in kbps.
Click Apply to apply the settings and click Refresh to refresh the page.