HCD-SX7/SX7B
REVISION HISTORY
Ver.
Date
1.0
2015.06
New
1.1
2015.07
Addition of Russian, Latin American, Singapore, Argentina, Thai and Indonesian models (HCD-SX7)
Deletion of "THE USER REGISTRATION DELETION METHOD OF SEN SERVICE"
1.2
2017.01
Change of MAIN board (AEP and UK models)
Change of Part No. for LCD MODULE (Ref. No. LCD1)
Change of Part No. for POWER-SUPPLY CORD (Ref. No. AC1) (UK and Thai models)
1.3
2020.02
Change of Part for MODULE DAB TUNER (Ref. No. DAB1) (HCD-SX7B)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a diff erent page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Description of Revision
, follow the procedure below.
(SMR-15014)
(SMR-16042)
(SMR-19028)
SYS SET