4-4-4. Installation of BKDS-7002 (Source Name Display Unit)
(BKDS-7015)
Contents
LE-147 Board
: 2 pcs
LE-148 Board
: 3 pcs
LE-180 Board
: 1 pc
DC-92 Board
: 6 pcs
Screw for board support : 12 pcs
Screw (+B2.6 x 5)
: 18 pcs
n
When cleaning the LED unit on the LE-147, 148 or 149 board, use a dry cloth or a cloth moistened with a
small amount of water. If using a cloth moistened with a solvent (alcohol and the like), it is possible to be
whiten and crack on the surface of the LED unit.
(1) Open the panel. (Refer to "4-4-1. Opening and Closing of Panel".)
(2) Turn off the power switch in the control panel. (Refer to "4-4-2. Turning On/Off the Power Switch".)
(3) Remove the KY-389A, 389B or 390 board.
(Refer to "1-2-5. Installation and Removal of Boards" in the maintenance manual part 1.)
(4) Connect the two harness of the DC-92 board to the CN15 and CN16 on the KY-389A, 389B or 390
board.
(5) Install the DC-92 board to the KY-389A, 389B or 390 borad using the two screws for board support
packed with BKDS-7002.
DC-92 board
KY-389A, 389B or 390 board
DVS-7200AE IM
Screws for board support
CN15
CN16
4-4. Installation of Options for Control Panel
Screws for board support
DC-92 board
4-17