Sony DVS-7200A Installation Manual page 75

3. RE-110 Board (BKDS-7690)
CN205
CN206
CN207
CN208
CN210
RV201 (K4) : +5 V (A) adjustment
RV202 (K4) : +5 V (B) adjustment
RV203 (K5) : +3 V adjustment
RV204 (K5) : _5 V adjustment
4. XPT-16 Board
CNT1 (C1) : +5 V TEST terminal
This terminal is used for the measurement of the +5 V voltage.
When re-adjusting the voltage after installing the option board to the unit, this terminal is used.
CNT2 (C1) : +3 V TEST terminal
This terminal is used for the measurement of the +3 V voltage.
When re-adjusting the voltage after installing the option board to the unit, the terminal on the CPU-264
board is used.
CNT3 (D1) : GND TEST terminal
This terminal is used for the reference against the +5 V and +3 V TEST terminals.
DVS-7200AE IM
(Component side/A side)
RE-110 board
CNT1
CNT2
CNT3
(Component side/A side)
XPT-16 board
5-1. Switch Settings on Boards and LEDs Description
CN202
CN201
CN203
CN204
RV201
RV202
RV203
RV204
CNX1
CNY1
CNZ1
5-5