Sony DVS-7200A Installation Manual page 25

Procedures
(1) Pull out the inner member while pressing the stopper of the rack mount rail RMM-18DV. (Fig. 1)
Inner member
(Fig. 1)
(2) Secure the inner member to the unit by the sixteen screws (B4 x 8) supplied with DVS-7200A.
Remove the feet of the unit as required. (Fig. 2)
(3) Secure the bracket to the outer member 1 by the preparated eight screws (B4 x 8). (Fig. 3)
To see the screw hole of the outer member 1, move the outer member 1 back-and-forth.
Plate nut (Long)
DVS-7200AE IM
B4 x 8
Inner member
Outer member1
Stopper
Plate nut (Long)
Brackets
Outer member2
Feet
B4 x 8
Outer member stopper
(Used for fixing the outer member2.)
B4 x 8
B4 x 8
(Fig. 3)
2-2. Rack Mounting
DVS-7200A
Inner member
B4 x 8
(Fig. 2)
Outer member1
B4 x 8
2-3