Installation Of Bkds-7090 (Redundant Power Supply Unit); (Bkds-7025/7026) - Sony DVS-7200A Installation Manual

4-4. Installation of Options for Control Panel

4-4-9. Installation of BKDS-7090 (Redundant Power Supply Unit)

(BKDS-7025/7026)

w
To avoid shock hazards, be sure to turn off the breaker at the outside of the control panel or unplug the
power cord when installing BKDS-7090.
Contents
Power unit : 1 pc
Screw (PS3 x 6) : 2 pcs
(1) Open the panel. (Refer to "4-4-1. Opening and Closing of Panel".)
(2) Turn off the power switches in the control panel.
(Refer to "4-4-2. Turning On/Off the Power Switch".)
(3) Properly insert BKDS-7090 to the pre-install position.
(4) Put the two levers at both sides of BKDS-7090 in the directions of the allows.
(5) Secure BKDS-7090 to the control panel by the two screws (PS3 x 6) supplied with BKDS-7090.
PS3 x 6
(6) Turn on the power switches in the control panel.
(Refer to "4-4-2. Turning On/Off the Power Switch".)
(7) Close the panel. (Refer to "4-4-1. Opening and Closing of Panel".)
4-34
PS3 x 6
BKDS-7090
DVS-7200AE IM