Setting About The System - Sony DVS-7200A Installation Manual

6-3-3. Setting about the System

(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[SETUP], [1] (SYSTEM), [F3] (SYSTEM SETUP)
The display for the function keys is changed as follows.
DATE
F1
(2) Press [F1] (DATE) key, and enter the date from the numeric keypad.
ex.) When setting to October 31, 1995, press the keys in the following sequence.
[1], [0], [.], [3], [1], [.], [1], [9], [9], [5], [ENTER]
(3) Press [F2] (TIME) key, and enter the time from the numeric keypad.
ex.) When setting to 2:15 p.m on time, press the keys in the following sequence.
[1], [4], [.], [1], [5], [.], [0], [ENTER]
In this case, pressing last [0] key can be omitted.
(4) Press [F4] (7.5 SETUP) key.
The display for the function keys is changed as the display of "6-3-2".
If the 7.5 IRE set-up is added to the output of the internal generating signal, press [F7] (7.5 SETUP)
key to select to the ON.
(The component system has not this setting.)
(5) Press [F5] (SCREEN FORMAT) key.
The display for the function keys is changed as the display of "6-3-2".
If the select to the 4 : 3 screen mode, press [F5] (4 : 3) key and if the select to the 16 : 9 wide screen
mode, press [F6] (16 : 9) key.
(6) Press [F6] (SWITCH TIMING) key to select the timing (field) which switcher switches.
Press the key every time, the display is changed in the following sequence.
DVS-7200AE IM
SIGNAL 7.5 SCREEN SWITCH
TIME FORMAT SETUP FORMAT TIMING RESUME
F2 F3 F4 F5
PANEL
RESUME ALARM
ANY ON ON ON
F6 F7 F8 F9 F10
6-3. Set-up
6-11