Installation Of Bkds-7444 (Frame Memory Expansion Board) - Sony DVS-7200A Installation Manual

4-3-5. Installation of BKDS-7444 (Frame Memory Expansion Board)

n
When installing the MY-95 board (BKDS-7444) be sure to turn off the power in order to prevent electric
shock or to protect the board from damaging.
BKDS-7444 configurations
MY-95 board : 1
Harness (MY-95) : 1
Supports : 2
Screws (PWH 3 x 6) : 2
Destination board
MY-66 board (BKDS-2041)
The following procedures explain how to install the BKDS-7444 assuming that the MY-66 board had
already been installed. When installing both BKDS-7444 (MY-95 board) and BKDS-2041 (MY-66
board) at the same time, refer to section "4-3-3. Installation of Optional Boards."
(1) Remove the two screws they are fixing the MY-66 board (BKDS-2041).
(2) Secure the two supports to the specified positions where the two screws were removed in step (1).
(3) Check the mounting direction of the MY-95 board and connect CN1, CN2, and CN3 on the MY-95
board to the connectors on the MY-66 board.
n
Be sure to check that the three connectors are connected securely.
(4) Fix the MY-95 board to the supports with the supplied two screws (PWH 3 x 6).
Screw (PWH3 x 6)
Support
Screw (PWH3 x 6)
DVS-7200AE IM
CN1
CN2
CN3
CN01
CN03
CN02
Screw (PWH3 x 6)
MY-95 board
Support
Screw (PWH3 x 6)
MY-66 board
4-3. Installation of Options for DVS-7200A
4-12-1