Scanning - XYZ Printing PartPro200 xTCS User Manual

Scanning

Mount the scan module in the machine (see the installation steps) and install the "XYZscan Color" software on your
computer to operate the scanning fuction of your 3D printer.
Face the front side of the object to be scanned toward the scan module and it takes about 10-40 minutes to scan it,
depending on computer performance and scanning quality. When you scan an object, the turntable rotates clockwise. At
this time, the camera on the scan module will capture continuous images at a speed of 30 images per minute. When the
scan is completed, "XYZscan Color" will display the 3D image captured in the 3D image.
Product Overview
Scan Module
Hardware Requirements
Operating systems Windows 7, 8.1, 10 (64-bit)
Minimum system CPU 4th Generation Intel® Core™ i5
requirements
USB 2.0
8GB/ Hard disk or more
Support the OpenGL 2.1 or above graphic
card
Install the scan module
To install the scan module, align it with the scanner base, press and hold the button, and attach it to the base vertically.
Scan Module Slot
Attach scan module to the
base vertically.
Scan Specification
Scan Technology Photogrammetry 3D
Scan Resolution
5cm ϕ x 5 cm – 14cm ϕ x 14 cm (H)
(Diameter x H)
Scan Software XYZscan Color
Turntable Payload ≦ 3 Kg/6.6lbs
Rescolution 5M pixel
Scan Accuracy 1.48 mm
File Types OBJ, STL
Button
P22 P22