XYZ Printing PartPro200 xTCS User Manual page 10

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Function Operation and Instructions
C. Ink Cartridge Installation
Ink Guidance
1. Prepare several paper towels and the
ink cartridge.
4. Press the cartridge head against the
paper towel to transfer some ink onto it.
7. If the ink did not transfer well, please
wet the paper towel with 75% Alcohol to
wipe the ink. After you clean the inkjet,
check to see if the ink transferred.
The 200 xTCS uses four color inks which can be replaced separately.
2. Unpack the ink cartridge.
5. If the ink did not transfer well, try
putting the paper towel on the table and
hold the ink pressed on the paper towel.
To prevent the opened ink cartridge from drying out when a print is
finished or the printer will be idle for days, follow the procedure to store
the cartridge:
1. Clean the nozzle of the ink cartridge with alcohol.
2. Seal the ink cartridge with the protective cover, and store the cartridge
in room temperature at 15 ~ 35 degree.
For the best print quality, clean the nozzle of the cartridge with alcohol
after removing the protective cover from the cartridge, and then install the
cartridge back to the printer before the next print.
3. Remove the cartridge cover.
6. Check if the ink transferred to the
paper towel displays two straight lines.
If so, ink guidance is successfully
completed. Once ink guidance is done,
install the ink cartridge.
Note
P10
P10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents