Siemens SICAM 7XV5673 Product Information page 30

When the "Battery Failure" indication is displayed,
replace the battery as follows:
1. Lever the cover of the battery compartment out of
the socket with a suitable tool (e.g. precision engi-
neer screwdriver 2.0 mm).
Figure 11-1 Removing the Cover of the Battery Compartment
2. Use an appropriate non-conducting tool (for exam-
ple plastic tweezers) to pull the battery out of the
compartment.
WARNING
Warning of explosion hazard in the case of batteries
that are not fully discharged
Non-observance may lead to death or serious
injury.
To avoid a short circuit on the battery contacts, the
battery may only be removed with a non-conductive
tool.
3. Dispose the battery as explained in the NOTES on
Battery Disposal.
4. Remove the new battery type PANASONIC CR2032
or VARTA 6032 101 501 from the packaging (check
the expiry date on the packaging).
5. Insert the battery carefully into the battery
compartment with the polarity indicated above the
battery compartment.
30 SICAM I/O Unit 7XV5673, Product Information
E50417-B1050-C484-A3, Edition: 03.2012
Cover of
battery
compartment