Table of Contents
Advertisement
Installation of the Battery
Upon delivery, the battery is insulated in the battery
compartment of the device.
1. Lever the cover of the battery compartment out of
the socket with a suitable tool (e.g. precision engi-
neer screwdriver 2.0 mm).
Cover of battery
compartment
Figure 8-2 Device of Top Side
2. Remove the battery.
3. Remove the insulation from the battery.
4. Insert the battery with the polarity indicated on the
cover of the battery compartment.
5. Close the cover.
NOTE
Chapter 11 describes how to replace and handle the
battery.
20
SICAM I/O Unit 7XV5673, Product Information
E50417-B1050-C484-A3, Edition: 03.2012
Polarit of
the battery
Name plate
Advertisement
Table of Contents
