Siemens SICAM 7XV5673 Product Information page 16

8.2 Assembly
Mount the device to a DIN rail according to EN 60750
in the following way:
Guiding of the
snap-in clip
DIN rail
Figure 8-1 Assembly on a DIN Rail
1. Pull down the release device at the snap-in clip and
hold it in this position.
2. Slide the device with the guiding of the clip-on to one
side of the DIN rail.
3. Move the device into the desired position on the DIN
rail.
4. Release the release device. The device is now
firmly mounted on the DIN rail.
16
Pulling direction
SICAM I/O Unit 7XV5673, Product Information
E50417-B1050-C484-A3, Edition: 03.2012
Snap-in clip
Release device