Table of Contents
Advertisement
8.3
Electrical Connection
DANGER
Danger due to high voltages
Non-observance will lead to death or serious injury.
Work may only be carried out by trained personnel
(see Preface) who are familar with and observe the
safety requirements and precautions.
Work may never be carried out if there is any danger-
ous voltage present.
De-energize the device.
In addition, a suitable isolating device shall be con-
nected upstream in order to be able to disconnect the
device from the power supply!
Secure the supply voltage with an approved (UL/IEC)
fuse: 1.6 A, type C.
If a melting fuse is used, a suitable approved (UL/
IEC) fuse holder has to be used.
NOTE
When performing electrical installations, you have to
observe the national and international regulations on
the construction of electric power installations.
18
SICAM I/O Unit 7XV5673, Product Information
E50417-B1050-C484-A3, Edition: 03.2012
Advertisement
Table of Contents
