Initial Setting; X84; Wireless Receiver Kit For Installation; Remote Controller Initial Setting - Daikin BRC7M675 Operation & Installation Manual

• Loading the batteries
1. Slide the front cover and remove it.
2. Insert the attached dry cell battery AAA.
LR03 (alkaline). Properly insert, set the
batteries by matching the (+) and (–)
polarity marks as indicated.
3. Replace the front cover.
Dry cell battery AAA. LR03
(alkaline)
1
Wireless remote
controller

4. INITIAL SETTING

Available functions on this remote controllers are
differ according to the indoor unit type applied.
Refer to the installation manual attached to the
Wireless Receiver Kit and conduct initial setting
according to the combination of the indoor unit.
„ Wireless Receiver Kit
For installation
1. REMOTE CONTROLLER
INITIAL SETTING
Available functions on the remote controllers are
differ according to the indoor unit type applied.
Refer to the following procedure and conduct initial
set according to the combination of the indoor unit.
1) The initial setting indication is displayed at the
first time of the battery insertion.
2) Check the model name of the model nameplate,
which is stuck on the indoor unit body.
Refer to the following table to find the
corresponding 4-digit initial setting value.
Indoor unit model
Indoor unit type
system
High wall
FXAQ-P*
mounted type
*: It will be the alphabet (A, B, C, ...) and the
number (1, 2, 3 ....).
2
Position
correctly!
3
Front cover
Fig. 2
name
Initial set
VRV SPLIT
system
–
and
1. Change the set value:
Press the
digit.
2. Determine the set value:
Press the
blinking digit and move to the right digit.
Press the
digit.
blinking
3) The initial set value is determined when the
digit at the far right is determined.
Then become to normal mode display.
value
1110
Fig. 1
button to change the blinking
button to determine the
button to move to the left
Press the button.
Press the button.
1
2
18