INSTALLATION MANUAL Wireless Remote Controller Kit MODELS BRC7C812 Read these instructions carefully before installation. Keep this manual in a handy place for future reference. This manual should be left with the equipment owner.
Wireless Remote Controller Kit Installation manual CONTENTS • The installation position of this receiver is one corner of the decoration panel. Therefore, confirm that its position 1. SAFETY CONSIDERATIONS.......... 2 is set so that the signal from the wireless remote control- 2.
• The direct transmitting distance of the remote controller is CAUTION approximately 23 ft.. Change the setting so that the internal electronic equipments • The signal cannot be transmitted if something such as cur- are not damaged with a pen etc. tains blocks the receiver and the remote controller.
(2) Pull the relay harness from the receiver (1) up to where Remote controller Indoor unit the clamp (10) meets the stopper, as shown above. Multiple setting Remote control- To control other For other than (Refer to (2) in drawing) ler display air conditions on left...
TEST OPERATION (2) Select the desired MODE NO. with the “ ” button. MODE • Perform test operation according to the instructions in the (3) Push the “ ” button and select the FIRST CODE NO.. installation manual attached to the indoor unit. •...
Need help?
Do you have a question about the BRC7C812 and is the answer not in the manual?
Questions and answers