Bluetooth Interface - Epson TM-T88VI Technical Reference Manual

2
Set from "Wi-Fi Setup Wizard" in the menu.
Setup and Operation Workflow
Select the network you want to connect to.
Enter the passkey.
Perform a test print.

Bluetooth Interface

Use a tool, such as a built-in Bluetooth connection tool of your device to establish the connection with the
printer. If your device is a Windows computer, use EPSON TM Bluetooth
pair a terminal and the printer. If your terminal is an iOS or Android terminal, use Epson TM Utility for iOS/
Android to easily pair your terminal and the printer.
 If the host computer and the printer are not connected on a continuous basis but rather connected
every time the printer starts printing, some time may be needed for the printer to actually start
printing after the host computer commands printing. This pause is the time required for
processing the connection between the host computer and the printer, and it depends on the
conditions of the environment where used.
 If data transfer from an application of the host computer has already been completed, data might
remain in the Bluetooth module internal buffer. As such data remaining in the buffer might be lost
when the connection is cut off, use the status or similar functions to check that transmitted data
has been completely printed before cutting off the wireless connection.
Chapter 2 Setup
®
Connector, which is a utility to easily
2
37