Intended Use; Scope Of Warranty; Transport And Storage - BEKA HPM-2S Original Operating And Assembly Manual

3.

Intended use

The device is only approved for the industrial use.
Attention!
Only operate the device if it is installed in/to another machine and operated together with it.
Only lubricants which comply with the machine manufacturer's specifications may be conveyed.
The device must only be used according to the technical data (see chapter 1 „technical data"). Never exceed
the mentioned values. Never operate the device without lubricant.
Unauthorized alterations of the device are not permitted. BEKA is not liable for damage of machine or persons that results
thereof.
Use according to the regulations means also:

Observance of all chapters and notes in the operating manual.

Carrying out all maintenance work.

Observance of all regulations concerning work safety and accident prevention during all life cycles of the device.

Having the necessary professional training and authorization of your company to operate the device and to carry out the
necessary work.
Attention!
Another use or a use beyond this is deemed improper.
4.

Scope of warranty

Warranties regarding to operational safety, reliability and performance will only be granted by the manufacturer if the device is used
according to the regulations and under the following conditions:

Assembly, connection and maintenance are carried out by authorized professional staff

The device is only used according to the operating manual

Never exceed the limit value indicated in the technical data.

Modifications and repairs at the device may only be done by BEKA
Guarantee and warranty for any damage at the device caused by improper lubricant (e.g. wear of piston,
piston jamming, blockades, brittled sealings etc.) will expire.
BEKA will generally not assume guaranty claims for any damage caused by lubricants, although those have
Attention!
been laboratory tested and released by BEKA, as such damage (e.g. by over-stored or incorrectly stored
lubricants, batch fluctuations, etc.) cannot be verified or reconstructed later.
5.

Transport and storage

Use suitable lifting devices for transport.
Do not throw the device or impose it to shocks.
Secure the device against toppling down or slipping during transport.
Observe all valid safety and accident prevention regulations for the transport. Wear suitable protective equipment if
necessary. Keep adequate distance to suspended loads. The transport help or the elevating device must have the
adequate carrying capacity.
When storing the device pay attention that the storage area is cool and dry in order to avoid corrosion of the individual parts of the
device.
...a product of
Page 6 © BEKA 2015 All rights reserved!