pottery barn kids PRESTON Manual
Media base
Hide thumbs
Also See for PRESTON:
- Important safety and assembly instructions (9 pages) ,
- Manual (8 pages) ,
- Instructions manual (8 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for pottery barn kids PRESTON
Summary of Contents for pottery barn kids PRESTON
- Page 1 PRESTON MEDIA BASE www.potterybarnkids.com Date: 2014-Sept-08 Page 1 of 7 Rev:...
- Page 2 Imported by / Importé par Pottery Barn Kids 3250 Van Ness, San Francisco, CA 94109 WARNING For use with televisions weighing lbs / (Kg) or less with a maximum width of 45-1/4 inches /114.9 (cm) which represents the overall width or inside dimension of the unit the TV will be placed on.
- Page 3 For use with televisions weighing (Kg) or less and with a maximum width of 45-1/4 inches / 114.9 (cm) Maximum weight per shelf is product weighing 25 pounds/ 11.3Kg Date: 2014-Sept-08 Page 3 of 7 Rev:...
- Page 4 Important Safety Instructions: Please read all instructions carefully before assembling this Media Base. • For your safety, assembly by two or more adults is strongly recommended. • Keep these instructions for future use. • Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the •...
- Page 5 Assembly Instruction Steps: 1. Attach the Left and Right Side Panel (B&C) to the Bottom Panel (D), by aligning the pre-drilled holes with the wooden dowels, as seen in the illustration below. Make sure the ledge on the Bottom Panel (D) and the cut-out on the Side Panel Frame (B&C) face downward, as shown below.
- Page 6 11. Place 1 Door Handle (P) over the pre-drilled holes on one of the Doors, as seen below. 12. Insert 2 Machine Screws (Q) through the pre-drilled holes of the Door and into the Door Handle (P), as shown below 13.
- Page 7 17. Insert the 8 Shelf Support Pegs (M) into the corresponding holes inside the assembled Media Base. 18. Place the 2 Adjustable Shelves (E) onto the Shelf Support Pegs, as seen below. Ensure each shelf is stable. 19. Adjust the levelers located on the bottom of the Media Base to keep unit level, as needed. Multiple Media Bases can be combined together, by following the assembly instructions below: 20.
- Page 8 FURNITURE TIPPING RESTRAINT WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision. Manufacturer assumes no liability for improper installation or excessive loads placed on screws, brackets or straps. Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended.