Change Service Level/Settings; Call Service Levelcall Service Level - Meiko TopLine Instructions For Use Manual

9

Change service level/settings

CAUTION – Malfunction due to incorrect parameter
Before changing parameter settings:
•
Contact an authorised in-house technician or MEIKO Service.
•
Note service instructions.
The service level permits the following settings and functions in the display:
•
Display or change the list of service parameters.
•
Ventilate the rinse pipe.
•
Ventilate the detergent pipe.
•
Set date and time.
•
Open door or unlock door.
•
Define the first text line in the error indicator (e.g. service number or number
of in-house technician)
9.1

Call service levelCall service level

1. Make sure that the washer-disinfector is ready for operation and that all
cleaning programmes have been completed.
2. Press arrow  for 2 seconds.
3. Enter access code.
4. 10000 = Display level 1.
5. 10001 = Display and change level 1.
6. Press the error acknowledgement key
Display shows service level.
Note
When the service level is shown in the display, all other functions of the
washer-disinfector are blocked.
If no key is pressed for 120 seconds, the washer-disinfector automati-
cally exits the service level and switches to the Ready for operation
status.
If a setting is being edited, the selected value flashes.
In the service level, the keys on the washer-disinfector have the following func-
tions:
9617722
.
46 / 60