3. Driver installation
3-1 Installation
The driver is automatically searched for and is installed when a detector (water leak detector LD-18) is
connected a PC using a USB connecting cable.
It is necessary to install "CP210x USB Composite Device" and "CP210x USB to UART Bridge Controller"
for the use of this function.
* Caution
Check if the power for the detector is ON, before connecting it to a PC.
The driver file is normally copied to
'C:\Program Files\Fujitecom\DNRwin\SiLabs\MCU\CP210x\Win2K_XP' at the time of
installation of WLDwin software.
Please never pull out the cable while installing data.
1. Installation of "CP210x USB Composite Device"
Turn ON the power for the detector and connect the
detector to a PC using a USB connecting cable. A
message appears in the right lower part of the screen.
2. Start-up of hardware search wizard
No connection to Windows Update is required.
Check [No connection] and then click the [Next]
button.
3. Automatic search for driver
The driver is searched for automatically and installa-
tion is executed.
Check [Install automatically] and then click the [Next]
button.
36
[Software]
Need help?
Do you have a question about the LD-18 and is the answer not in the manual?