Description Of Functions; Screen Operation Flow - SubSurface Instruments LD-18 Operation Manual

5. Description of functions

5-1 Screen operation flow

Power ON
Note : It returns to "File list screen" when
5-1-1 Start-up screen
5-1-2 Level display screen
BPF (band pass filter) : Displays filter setup.
NF (notch filter) : Displays filter setup. (50Hz, 60Hz, OFF)
NR (noise reduction) : Displays NR setup. (Lv.1, Lv.2, Lv.3, OFF )
SENS (sensitivity) : Displays sensitivity adjust value. (00 to 40)
MIN : Displays minimum level value. (000 to 999)
Bar numerical value : Displays numerical value of the level bar. (00 to 90)
: Lit while the main body is connected to a PC.
: Lit while the backlight is in use.
: Displays the battery capacity. (Display is made in three different levels. Replace batteries if this mark
begins to flicker.)
No.FULL : Appears when the number of saved files reached the full level (250 files).
Level display screen
Start-up screen
FILE
Graph display screen
NR
File list screen
FILE
switch is pushed in "Graph display screen".
This screen appears when the power for the main body
is ON, and then transition to the level display screen
occurs immediately.
Level bar, SENS, setup of filters, minimum level value
and others are displayed for permitting water leak detec-
tion work.
16
[Hardware]
FILE