4. Method for setup
(1) Take the main body, pick-up sensor with hand switch and headphone out of the case. Correct deformation
and kinking of the pick-up cable.
(2) Put the shoulder strap through the main body.
Or, put a belt through the waist belt fitting.
Using the detector
as mounted on waist
(3) Connect the pick-up sensor with hand switch to the main body.
(4) Adjust the length of the pick-up cable to an appropriate level.
(5) Connect the headphone to the main body.
Shoulder strap fitting
Waist belt fitting
5
3
Setup has been completed.
Using a shoulder strap
15
[Hardware]
Need help?
Do you have a question about the LD-18 and is the answer not in the manual?