General Troubleshooting; Using This Guide - Matrix CX Series Troubleshooting Manual

G T
ENERAL ROUBLESHOOTING
•
UPDATE TO THE LATEST SOFTWARE VERSION, if possible.
o
Reference the
•
Cycling power is recommended as the first attempt to fix most failures, and after major repairs are
implemented.
•
To access Service Modes:
From idle: Press & hold "MATRIX" logo for ~5 seconds, then type 3001 enter.
o
From workout: Press the "Hamburger" button in upper right. Press & hold on "Options" in
o
upper left until keypad appears, then type 3001 enter.
•
If multiple, identical machines are available, swap suspected failed parts (console, LCB, cables,
etc.) and observe if the failure follows.
U
SING THIS GUIDE
Read & understand the General Troubleshooting section above.
Given a problem description, link to the topic that appears most fitting from the ToC on the first page or
Find (ctrl-f) by keyword. Find the
the flow through asking questions, taking measurements, and suggesting corrective action. The
"Additional Information" section within each topic contains notes and details pertaining to that topic.
After each corrective action is taken, re-evaluate if the failure has been resolved. Some indications have a
straightforward order of attempts, and not all steps are always necessary if a lower-level fix resolves the
issue.
2/16 | Version: 2 | Revision Date: 3/6/2020
Software Update topic if anything unexpected happens.
Green flowchart bubble that best describes the specific issue, and follow
| Revised by: JS
T C
O
Matrix CX Cycles