Display Of The Low-Cut Filter Setting (Lcf); Lock Function Setting Display (Lock); Display Of The Power Save Setting (Power Save); Display Of Audio Input Level (Input Level) - Sony DWR-S03D Operating Instructions Manual

Display of the low-cut filter setting
(LCF)
The low-cut filter setting of the transmitter is displayed.
Lock function setting display
This disables the transmitter main unit POWER button and
locks settings so they cannot be changed. Doing so
prevents users from accidentally turning off the power.
Settings can be changed via Cross Remote from the
receiver even if the transmitter LOCK function is enabled.
Display of the power save setting
(POWER SAVE)
The power save setting of the transmitter is displayed.
Display of audio input level
(INPUT LEVEL)
The audio input level setting of the transmitter from which
transmission is currently being received is displayed.
Display of the transmission power
setting
(RF POWER)
The transmission power setting of the transmitter from
which transmission is currently being received is
displayed.
Display of the +48V power setting
(+48V)
The +48V power setting of the transmitter is displayed.
Time display
(TIME)
The following time is displayed according to the
transmitter BATT REMAIN setting.
USAGE TIME: Displays the accumulated transmitter
usage time.
BAT.REMAIN: Displays the estimated remaining
transmitter operating time.
Display of battery level display
settings
(BATT REMAIN)
This sets the display method for the transmitter battery
level.
Cross Remote
This function must be set to allow the wireless remote
control function to be used between the transmitter and
receiver.
OFF: Stops the wireless remote control function.
(LOCK)
ON: Starts the wireless remote control function with the
previously paired receiver.
PAIRING: Executes a new pairing.
For details, see "Using the Cross Remote" on page 18.
17
(RF REMOTE)