Select Protection Function - ABB RELION REB500 Applications Manual

Section 4
Configuring bay protection using HMI500
IEC18000639 V2 EN-US
Figure 3:
Table 5:
Button
Continue
Copy
Paste
Delete configuration
4.3

Select Protection Function

This dialog box is divided into the following parts:
The protection functions available for configuration are listed on the left (in the form of
buttons). Its content is determined by the already selected Bay protection variant (see
4.2).
The protection functions used for configuration are listed on the right. The first is always the
binary output function BP output (see
12
Settings/ Bay protection Configuration
Bay protection/ Configuration - buttons
Function
Opens the dialog box Select Protection Function of a selected bay and
thus the BP configuration.
Instead of Continue button, simply double-click a unit line.
Copies the BP configuration of a selected bay
Pastes the copied BP configuration to a selected bay
Delete the BP configuration of the selected bay
© 2019 - 2020 Hitachi Power Grids. All rights reserved
Figure 4).
1MRK 505 403-UEN Rev. C
GUID-5A48871A-9791-4395-A220-48F40327403E v2
Section
Bay protection functions REB500
Application manual