Recording A Binary Signal As An Event - ABB RELION REB500 Applications Manual

Section 4
Configuring bay protection using HMI500
IEC18000755 V1 EN-US
Figure 18: BP output (General purpose)
Edit (used for both Default and General Purpose signals)
Click on the respective Edit button to assign a Default or General purpose signal. This opens
the dialog box Select binary input. The remaining procedure is the same as described for
binary input signals (see
4.4.5

Recording a binary signal as an event

Only bay protection binary signals can be configured to be recorded as events that are also
configured via menu Configuration/Binary module (output signals do not necessarily have to
be assigned to output relays).
24
Location of BP general purpose output signals within the BP function diagram
see Figure 1, Label number 12.
Section 4.4.3).
Only bay protection output signals that are configured to a BP Output Channel
can be assigned to an output relay of the bay unit by selecting the menu
Configuration /Binary module /Outputs . Section
in REB500 Technical manual - Bay protection functions provides a list of
available bay protection output signals.
Location of Binary module output signals within the BP function diagram see
Figure 1, Label number 13.
© 2019 - 2020 Hitachi Power Grids. All rights reserved
1MRK 505 403-UEN Rev. C
17000035-IEC18000755-1-en.vsdx
Binary output signals of BP
GUID-4E2AB3AD-69BB-4474-842C-EE407B23B1AE v1
Bay protection functions REB500
Application manual