ABB RELION REB500 Applications Manual page 19

1MRK 505 403-UEN Rev. C
IEC18000640 V1 EN-US
Figure 4:
Table 6:
Menu item
No.
Func.
Description
P1..P4
Copy of
If the number of function instances exceeds the size of the display area, a scroll bar
automatically appears on the right. The maximum number of instances per bay unit is limited
to 128.
There are a number of tabs, which can be selected in this part of the dialog. The first tab
(ParSet 1..4) lists all the functions. It has to be selected to change functions and determine the
instances where they occur. The tabs ParSet 1 to ParSet 4 list the functions configured for a
particular parameter set and are merely for information.
Creating instances of protection functions
An instance of a protection function is created by selecting it in the list on the left of the dialog
using the left mouse button and while keeping the button depressed dragging it onto the area
of the first tab (ParSet 1..4) (drag and drop). It is not possible to drop the function while the
symbol
cursor changes to an arrow and the mouse button is released.
Bay protection functions REB500
Application manual
Select Protection Functions
Select Protection Function – used BP Functions
Description
Unique instance number of the BP function
Symbol representing the BP function of the instance
User specific description of the BP function of the instance
Parameter set in which the protection function occurs. Switching
between parameter sets is accomplished using the binary input signals
19600_x, 19605_x, 19610_x and 19615_x
x = Activation BP ParSet 1...4
Instance No. of the original function, where the instance is a copy of a
function that already exists.
is being shown. The instance of the protection function is created when the mouse
© 2019 - 2020 Hitachi Power Grids. All rights reserved
Configuring bay protection using HMI500
IEC18000640-IEC18000640-1-en.vsdx
Section 4
13