Configuring Bay Protection Using Hmi500; Integration Of Bay Protection; Configuring The Bay Protection Using Hmi500 - ABB RELION REB500 Applications Manual

Bay protection functions, version 8.3 iec

Hide thumbs Also See for RELION REB500:

Technical manual (194 pages)

Operation manual (110 pages)

Applications manual (108 pages)

Table Of Contents

Table of Contents

1MRK 505 403-UEN Rev. C

Section 4

4.1

Integration of bay protection

The REB500 bay models include no bay protection functionality. The integration of the bay

protection (variant L-V2 or L-V4) takes place under the setfile engineering during the Import a

Bay Model process.

The dialog box Bay model import options enables the selection of the BP variant L-V2 or L-V4.

After pressing the OK button, the respective bay is imported to the single-line diagram and the

selected BP variant (comprising the L-V2 or L-V4 set of BP functions) is available for further

configuration.

IEC18000638 V1 EN-US

Figure 2:

For detailed information about the setfile engineering, refer the

Section

4.2

Configuring the bay protection using HMI500

To configure and set the bay protection function, open the HMI500 menu Settings and select

the menu item Bay protection.

Bay protection functions REB500

Application manual

Configuring bay protection using

HMI500

Selection the import option Bay protection and Variant

Single-line diagram .

The setfile engineering and the integration of the Bay protection requires that

the HMI500 is started under the Configurator Mode. After that, the

configuration details can also be adjusted under the Operator Mode.