Configuring The Bay Protection Using Hmi500; Select Protection Function - ABB REB500 Applications Manual

1MRK 505 353-UEN
3.2
3.3
Application Manual
Bay protection functions REB500

Configuring the bay protection using HMI500

To configure and set the bay protection function, open the HMI500 menu "Set-
tings" and select the menu item "Bay protection".
Figure 3 Settings / Bay protection Configuration
Table 36 "Bay protection – Configuration" - buttons
Button Function
Continue Opens the dialogue "Select Protection Function" of a selected bay and
thus the BP configuration.
Instead of "Continue" button, simply double click a unit line
Copy Copies the BP configuration of a selected bay
Paste Pastes the copied BP configuration to a selected bay
Delete configuration Delete the BP configuration of the selected bay

Select Protection Function

This dialog is divided into the following parts:
The protection functions available for configuration are listed on the left (in the
form of buttons). Its content is determined by the already selected Bay protection
variant (see Section 3.2).
The protection functions used for configuration are listed on the right. The first is
always the binary output function "BP output" (see Figure 4).
Configuring bay protection using HMI500
Section 3
19