Section 3 Configuring Bay Protection Using Hmi500; Integration Of Bay Protection - ABB REB500 Applications Manual

Section 3
Configuring bay protection using HMI500
Section 3
3.1
18
Configuring bay protection using HMI500

Integration of bay protection

The REB500 bay models include no bay protection functionality. The integration
of the bay protection (variant V-L2) takes place under the setfile engineering dur-
ing the "Import a Bay Model" process.
The dialogue "Bay model import options" enables the selection of the BP variant
V-L2. After pressing the OK button, the respective bay is imported to the single-
line diagram and the selected BP variant (comprising the "V-L2 set" of BP func-
tions) is available for further configuration.
Figure 2 Selection the import option "Bay protection and "Variant""
For detailed information about the setfile engineering refer the REB500 Engineer-
ing Manual Section "single-line diagram"
The setfile engineering and the integration of the Bay protection re-
quires that the HMI500 is started under der "Configurator Mode".
After that, the configuration details can also be adjusted under the
"Operator Mode".
1MRK 505 353-UEN
Application Manual
Bay protection functions REB500