Basic Operation; Standby/On; Select Modes; Adjust The Bass Level - Hisense HS512 User Manual

Standby/ON

EN
When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
- If a TV or an external device is connected, the
unit will switch on automatically when the TV
or the external device is switched on.
- When there is no input signal from the unit
in over 15 minutes, then it will automatically
switch to Standby mode.

Select Modes

Press the (SOURCE) button repeatedly on the
unit or the SOURCE, BT buttons on the remote
control to select the AUX, OPTICAL, COAXIAL,
HDMI 1, HDMI 2, HDMI ARC, USB and BT
(Bluetooth) mode. The selected mode will show
on the display.

Adjust the Bass Level

Press the BASS +/- buttons on the remote
•
control to adjust bass level. (bass +5 ~ bass -9).

Turn the Surround Sound ON/OFF

• Press the SURROUND button on the remote
control to turn on the surround sound. Press
this button again to turn off the surround
sound.

Adjust the Volume

Press the VOL+ / VOL- buttons on the unit or
-
on the remote control to adjust the volume.
- If you wish to turn the sound off, press the
MUTE button on the remote control. Press the
MUTE button again or press the VOL+ / VOL-
buttons on the unit or on the remote control
to resume normal listening.

Basic Operation

Adjust the Brightness

- Press the DIMMER +/- button on the remote
control to select brightness level.

Select a Preset Sound Effect

While playing, press the EQ button on the
•
remote control to select desired preset
equalizers:
MOVIE, MUSIC, NEWS, SPORT.

Set the Audio Delay

Video image processing, sometimes longer than
the time required to process the audio signal. This
is called "delayed. " Audio Delay feature is designed
to remedy this delay. By default, the audio delay is
set to 0.
- Set the audio delay, provided only for the
current playback mode. (As provided in the
HDMI ARC audio delay mode, the delay mode
is valid only for the HDMI ARC).
1. During ON mode, press and hold the SURR
button to enter the audio delay settings, the
unit's display will scroll "LATENCY SET".
2. Press the VOL+/- buttons will be a 10 ms
frequency hopping to adjust the delay time.
Set 600 ms maximum delay.
- the local display 0-20, corresponding to time 0
- 200ms.
3. Press the
- By default this opportunity to set the audio
delay memory.
AUX / OPTICAL / COAXIAL /
HDMI ARC Operation
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the
the SOURCE button on the remote control to
select the AUX, OPTICAL, COAXIAL, HDMI 1,
HDMI 2, HDMI ARC mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL +/– button to adjust the volume
to your desired level.
14
button or exit settings 10S.
/ PAIR
button repeatedly on the unit or