Connect Power; Pairing The Wireless Subwoofer With The Main Unit; Automatic Pairing; Manual Pairing - Hisense HS512 User Manual

5.1.2ch soundbar with wireless subwoofer & dolby atmos
Hide thumbs Also See for HS512:
Table of Contents

Advertisement

Available languages

Available languages

Connect Power

Risk of product damage!
-
Ensure that the power supply voltage
corresponds to the voltage printed on
the back or the underside of the unit.
-
Before connecting the AC power cord,
ensure you have completed all other
connections.
Soundbar
Unwind the mains adapter and mains cable to their full length. Connect the mains adapter to the DC IN
23V socket of the soundbar, then connect the mains cable to the mains adapter and into a mains socket.
Subwoofer
Connect the mains cable to the AC~ Socket of the subwoofer and then into a mains socket.

Pairing the Wireless Subwoofer with the Main Unit

Automatic pairing

The subwoofer and soundbar will automatically pair when both units are plugged into the mains sockets
and turned on. No cable is needed for connecting the two units.
When the subwoofer is pairing with the main unit, the Pair Indicator will flash fast.
When the subwoofer is paired with the main unit, the Pair Indicator will light up.
NOTE:
-
Do not press the Pair button on the rear of the subwoofer, except for manual pairing.
-
If the automatic pairing fails, pair the subwoofer with the main unit manually.

Manual pairing

1. Ensure that all the cables are well connected and the main unit is in Standby mode.
2. Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will
enter the pairing mode and the Pair Indicator will blink quickly.
3. Press
the button on the main unit or on the remote control to switch the main unit on.
4. After the wireless connection succeeded, the Pair Indicator will light up.
5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer and
then reconnect the main cable after 3 minutes. Repeat step 1 ~ 4.
NOTE:
If the wireless connection fails again, check if there is conflict or strong interference
(for example, interference from an electronic device) around your location. Remove these conflicts or
strong interferences and repeat the above procedures.
The subwoofer should be within 6m (18 feet) of the soundbar in an open area.
If a TV or an external device is connected, the main unit only AUX model and the subwoofer will
switch on automatically when the TV or the external device is switched on.
If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator will
flash. Follow step 1 ~ 4 above to pair the subwoofer to the main unit.
13
EN

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents