ParaBody Serious Steel Pro System Assembly Instructions Manual page 4

47
1
47
4
34
48
12
1/2 X 3-1/4" 26
FIGURE 2
STEP 2:
• Assemble two COVER CAPS (48) to the ends of the BENT TUBE (4) as shown in FIGURE 2.
• Insert two 2" SQ. END CAPS (47) to the ends of the UPRIGHT FRAME (1) as shown in FIGURE 2.
• SECURELY assemble the LOW ROW ATTACHMENT (12) to the BENT TUBE (4) and UPRIGHT FRAME (1) using two 1/2 X
3-1/4" BOLTS (26) and two 1/2" LOCKNUTS (34) as shown in FIGURE 2.
1/2 1/2 1/2 1/2 1/2 1/2
0
1 2 3 4 5
6
4