ParaBody 874 User Manual

ParaBody 874 User Manual

Multi-angle bench system
Hide thumbs Also See for 874:

Advertisement

874 MULTI-ANGLE BENCH SYSTEM
CLASS H
PART # 7710601
REV. B
USER'S GUIDE
1
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 874109
Revision: 03/15/04

Advertisement

Table of Contents
loading

Summary of Contents for ParaBody 874

  • Page 1 874 MULTI-ANGLE BENCH SYSTEM WARNING: Read and follow all directions for each step to insure proper assembly of this product. USER’S GUIDE CLASS H Version: 874109 PART # 7710601 Revision: 03/15/04 REV. B...
  • Page 2: Important Safety Information

    3. Keep body and clothing free of all moving objects. DO NOT attempt to fix. Notify your authorized ParaBody dealer before use and have repairs made by 4. Inspect the machine before use. DO NOT use it if it an authorized service technician.
  • Page 3: Important Notes

    IMPORTANT NOTES Please note: * Thank you for purchasing the ParaBody 874 Multi-Angle Bench System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
  • Page 4 1’ 3’ 2’ 4’ 5’ 1’ 2’ 3’ 4’ 5’ 6’ 7’ 1 Square = 1’ X 1’...
  • Page 5: Parts List

    PARTS LIST PART # DESCRIPTION PART # DESCRIPTION 6650609 BENCH FRAME 3235204 3/8 X 1” BOLT 6650109 ADJUSTABLE SLIDE 3235212 3/8 X 3” BOLT 6649309 ADJUSTABLE SLEEVE 3114403 3/8” WASHER 6624210 LEFT BACK PAD ANGLE 3114702 3/8” LOCK NUT 6624310 RIGHT BACK PAD ANGLE 3235315 1/2 X 3-3/4”...
  • Page 6 31 3/8 X 1-3/4” 18 3/8 X 3” 18 3/8 X 3” FIGURE 2 STEP 2: • Slide four 2” SQ. COVER CAPS (15) over the ends of the FRONT & REAR BASE (6 & 7) as shown in FIGURE 2. •...
  • Page 7 24 1/2” LOW HEIGHT 1/2 X 3-3/4” 21 FIGURE 3 STEP 3: • SECURELY assemble one SPRING PIN ASSEMBLY (11) to the spring pin barrel on the ADJUSTABLE SLEEVE (3). See FIGURE 3. • Attach eight 3/4 X 1-1/2” GLIDES (28) to the inside of the ADJUSTABLE SLEEVE (3) as shown in FIGURE 3 using the following steps: •...
  • Page 8 24 1/2” LOW HEIGHT 24 1/2” LOW HEIGHT 22 1/2 X 5-1/2” 1/2 X 8” 23 FIGURE 4 STEP 4: • Assemble the LEFT and RIGHT BACK PAD ANGLE (4 & 5) and two HINGE TABS (10) to the BENCH FRAME (1) using one 1/2 X 8” BOLT (23) and one 1/2”...
  • Page 9 • Slide one 3 X 2” END CAP (13) into the front of the BENCH FRAME (1) as shown in FIGURE 5. Thank you for purchasing the Parabody 874101 MULTI-ANGLE BENCH. If unsure of proper use of equip- ment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.
  • Page 10: Maintenance

    Please note: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your ParaBody customer service representative at (800) 328-9714. * Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
  • Page 11: Limited Warranty

    ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired or replaced by ParaBody.
  • Page 12 LIFEFITNESS 5100 North River Road. Schiller Park, IL 60176 U.S.A. Tel: 847.288.3300 Fax: 800.216.8893 800.328.9714 (Toll-free within the U.S. and Canada) www.parabody.com INTERNATIONAL OFFICES Life FitnessAtlantic BV Life Fitness (UK) Ltd. Atlantic Headquarters Queen Adelaide Bijdorpplein 25-31 Ely, Cambs CB7 4UB...

Table of Contents