Advertisement
FIGURE 20
STEP 20:
• SECURELY assemble one 3-1/2" PULLEY (23) and one CABLE RETAINING CLIP (56) to the plate on the UPRIGHT
FRAME (1) using one 3/8 X 2" BOLT (29), one 3/8" WASHER (31), and one 3/8" LOCK NUT (36). See FIGURE 20.
• SECURELY assemble one 3-1/2" PULLEY (23) into the slot on the UPRIGHT FRAME (1) using one 3/8 X 2-3/4" BOLT (28),
two 3/8" FLANGE SPACERS (42), and one 3/8" LOCK NUT (36). See FIGURE 20.
FIGURE 21
3/8 X 2" 29
STEP 21:
• SECURELY attach one 3-1/2" PULLEY (23) to the plate on the UPRIGHT FRAME (1) using one 3/8 X 2" BOLT (29), one
CABLE RETAINING CLIP (56), one 3/8" WASHER (31), and one 3/8" LOCK NUT (36). See FIGURE 21
3/8 X 2" 29
3/8 X 2-3/4" 28
56
23
42
1
23
31
36
15
56
1
23
31
36
36
1
Advertisement
