Repair And Replacement Of Parts; Replacing Filter Cartridges - unGer HydroPower RO S Operating Instructions Manual

HydroPower® RO S

Replacing filter cartridges

7.3 Repair and replacement of parts

You will find a spare part list on the Unger website „www.ungerglobal.com/service/downloads/product-
assortment" with parts that you can change yourself.
For any further repairs, please contact your dealer.
7.3.1 Replacing filter cartridges
If the display shows a value of 10 ppm or more, the resin filter filter must be replaced (see point 7.2.1).
In addition, the performance of the membrane should be monitored monthly (see point 7.2.2). The
combi-pre-filter should also be changed regularly (approx. every 30,000 litres) to ensure membrane
protection, especially against chlorine (see point 7.2.2).
Changing all 3 filter cartridges is quick and easy:
Changing the combi-pre filter
1. Switch off the HydroPower RO S and disconnect the power supply.
2. Unscrew the left filter cartridge with the filter key and dump the water.
3. Remove and replace the filter insert. The direction doesn't matter.
4. Screw in the cartridge again to the unit and fix it with the filter key.
The filter cartridge is replaced .
3
CAUTION
Irritation to the eyes, skin and respiratory tract possible.
In the right filter cartridge, there is resin for the final demineralization of
`
the water.
Avoid any contact with the resin when working on the filter cartridges.
`
Wear protective gloves and goggles.
`
In case of contact with eyes, remove contact lenses and rinse immediately
`
with plenty of water.
Wash hands after finishing work.
`
1
2
2
27