HydroPower® RO S
General safety regulations
3.2 Mechanical hazards
Crushing due to incorrect operation and / or carelessness.
Do not reach between the ground surface and the HydroPower RO S.
`
Do not place objects in the openings of the HydroPower RO S.
`
Place the HydroPower RO S on an even surface only.
`
Ensure sufficient stability and secure the HydroPower RO S against tipping over or rolling
`
away.
In the case of faults and emergencies, immediately turn off the unit by turning the lower
`
switch to OFF.
Wear safety shoes.
`
3.3 Electrical hazards
Electric shock and burns due to live parts.
Before each use, perform a visual inspection of the power cable for damage. If you notice
`
any damage, contact your distributor.
Maintenance on the electrical components of the system may only be carried out by
`
employees of Unger Germany GmbH or their authorized specialist dealers / technicians.
3.4 Thermal hazards
Burns due to hot surfaces.
The housing of the pump motor as well as the coils of the valves can become hot during
`
operation. Allow the system to cool down sufficiently before touching components marked
with this symbol.
Wear protective gloves.
`
3.5 Hazards due to pressure
Injuries from pressurized containers.
The 3 filter cartridges are pressurized during operation.
`
Never open/remove a filter cartridge or any hose during operation.
`
13